Telex IP-223 - Managing User Accounts (Delete;Add)

111
Account Setup Window
Delete, Username, Password, New Password, Confirm Password Display Columns
The Delete, Username, Password, New Password, Confirm Password columns display the existing user accounts you have
created.
To delete an account, do the following:
1. Select the Delete check box for the account you want to delete.
2. Click Delete.
3. Click Submit.
4. Click Save to EEPROM.
The Save to EEPROM window opens.
5. Click Save Parameters.
Changes are now permanently save to the IP-223.
To change a created account password, do the following:
1. In the New Password field, enter a password.
2. In the Confirm Password field, enter the same password used in step 1.
3. Click Save.
4. Click EEPROM.
5. Click Save Parameters.
Changes are now permanently saved to the IP-223 console.
Delete Button
The Delete button is used to delete the selected user account(s). User accounts are marked for deletion by selecting the Delete
check box.
Add New User Button
The Add New User button opens the Create New User window. From this window, you can create a user profile with
selectable permissions. For more information, see “Add New User Window” on page 117.
Created Accounts