113
Account Setup Window
Reset Button
The Reset button is used to send changes to the browser configuration windows.
To permanently save the change, do the following:
1. Select the Reset System Parameters radio button.
OR
Select the Restore Factory Defaults radio button.
2. In the reset confirmation code number, enter the reset confirmation code number.
3. Click Reset.
4. Click Save to EEPROM.
The EEPROM window opens.
5. Click Save Parameters.
Factory default settings are restored to the browser configuration windows.
OR
Click Reset IP-223, to undo and restore system parameters to the last saved configuration.
System settings on both the console and the browser configuration windows are set to the previously saved version.
To Next Page
Loading...