91
Per Line Setup Window—Phone Mode, View 1
ANI Call Format Field
The ANI Call Format field identifies the call string format for the ANI Decoder #.
This field can contain up to 16 digits.
These include digits 0–9, A–D (A–F for other formats), *, # and the following characters:
I (Caller ID) - Placed into the ID field of the ANI packet or the ANI field of the caller portion of the telegram. The
ID is stored as a 32-digit string in the packet.
G (Group Digits) - Stored in the Group section of the ANI packet. The group value is converted to a decimal number
and is stored as an 8-digit string in the packet.
S (Status) - Digits represented by S are interpreted as status information. These values are converted to decimal
numbers and stored as an 8-digit status string in the ANI packet. The console has a corresponding
list of the status numbers and descriptions that are displayed upon receipt of the packet.
P (Pause) - When inserted into the string, a pause is expected in this location. The pause duration is set in the
Pause Duration field (see “Pause Duration Field - Local and Tone Modes” on page 79).
R (Calling ID) - Used to delineate the location of the digits being used for a selective call. These digits represent the
address or ID of the person being called. They are stored in the ANI packet as an 8-digit string.
To Next Page
Loading...