83
Per Line Setup Window—Phone Mode, View 1
Mic Click Call Enabled Check Box
The Mic Click Call Enabled check box indicates a remote radio user can click the radio PTT the stated number of times
within a specified period of time to dial a programmed number. Upon receipt of this sequence, the IP-223 takes the PIB or TDI
offhook and automatically dials the number in the Click Dial String field.
Number of Clicks Field
The Number of Clicks field identifies the number of times the radio PTT must be pressed to automatically dial the number in
the Click Dial String field.
The range for this field is 1 to 5.
Time Between Clicks Field
The Time Between Clicks field identifies the amount of time, in ms, allowed between mic clicks.
The range for this field is 0 to 9999ms.
Click Dial String Field
The Click Dial String field identifies the number automatically dialed when the radio PTT is pressed the number of times
specified in the Number of Clicks field.
The range for this field is DTMF digits 0–9 or #.
Click Dial Timeout Field
The Click Dial Timeout field identifies the amount of time, in seconds, the phone rings before hanging up.
The range for this field is 10 to 60 sec.
Mic Click Setup
To Next Page
Loading...