EasyManua.ls Logo

Telex IP-223 - Phone Mode Advanced Options

Telex IP-223
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
85
Per Line Setup Window—Phone Mode, View 1
Rx AGC Enabled Check Box
The RxAGC Enabled check box indicates the phone audio includes an AGC. If selected, an AGC step is added to the phone
RX audio. This results in a more consistent phone RX audio by increasing the level of low audio and decreasing the level of
loud audio.
NOTE: This is a software driven AGC. The per line hardware AGC is not used.
Keep Alive Digits Enabled Check Box
The Keep Alive Digits Enabled check box indicates keep alive digits are generated at the remote site or responded to at a
local site. Keep Alive Digits are responsible for verifying the phone connection status - active or inactive.
Star/Pound Keying Enabled Check Box
The Star/Pound Keying Enabled check box indicates an inbound caller on the phone line has the capability to control the
radio connected to the opposite line of the IP-223. Used in conjunction with Auto Answer and Auto Disconnect Time, this
function allows the user to key-up and key-down the radio. If selected, the inbound caller can key-up and key-down the radio
connected to the opposite line of the IP-223. The star key (*) keys up the radio, the pound key (#) keys down the radio.
Pushing double # hangs up the remote phone line.
Detect Tones Enabled Check Box
The Detect Tones Enabled check box indicates key-up tones detected on the phone line automatically keys up the radio on the
opposite line of the IP-223. This parameter is used in Radio Phone Mode.
Hook Flash Time Field
The Hook Flash Time field identifies the amount of time, in ms, an offhook line is temporarily placed during a hook flash.
The range for this field is 0 to 9999ms.
Network Call Timeout Field
The Network Call Timeout field identifies the amount of time, in minutes, before a network call is automatically placed
onhook.
The range for this field is 0 to 60min.
Station ID Field
The Station ID field is used to enter a unique ID number to identify the line. This ID is sent after an auto-answer event.
This field can contain up to 12 digits.
Busy Channel Lockout Check Box
The Busy Channel Lockout check box is not available in Phone mode.

Table of Contents