Telex IP-223 - Chapter 5 Update Firmware; Installing Telex System Manager (TSM)

To Next Page

To Previous Page

143

CHAPTER 5

Update Firmware

Telex VoIP Hardware firmware can be updated using TSM (Telex System Manager). A copy of TSM is available on the CD

included in the shipment with the VoIP hardware.

NOTE:

• VoIP hardware includes the following Telex devices: IP-223, IP-2002, IP-1616, C-6200 and NEO-10.

• TSM uses .tfb (Telex Firmware Binary) files to update VoIP firmware.

REFERENCE: Updated firmware can also be downloaded from the Telex website at www.telex.com/RadioDispatch/.

Install TSM

To install TSM, do the following:

1. Locate the setup.exe file on the Telex CD.

Download TSM from www.telex.com/Downloads/, see “Download Telex Firmware” on page 145.

2. Double-click setup.exe.

The Telex System Manager install window appears.

3. Click Next.

The Select Installation Folder window appears, see Figure 78.