Setup Information
62
TTL Field
The TTL field identifies the number of routers the multicast audio packets must pass through before being discarded. Network
design dictates this value. See your network administrator for further information.
The range for this field is 0 to 128.
Default is 6.
Enable Check Box
The Enable check box is used to enable communication with TSM (Telex System Manager). If cleared, TSM can not detect
the IP-223. By default, the check box is selected. TSM is used to update IP-223 firmware.
To learn how to update IP-223 firmware, see “Update Firmware” on page 111.
REFERENCE: For more information, see the Telex System Manager Technical Manual (LIT000259000).
Name Field
The Name field displays Sys Manager and is not editable.
Multicast Address Field
The Multicast Address field displays the default Multicast Address used by TSM to detect connected VoIP hardware.
This field is not editable.
Incoming Port Field
The Incoming Port field identifies the port used to communicate with TSM. TSM requests data from the IP-223 through this
port. This field is automatically populated and is not editable.
Outgoing Port Field
The Outgoing Port field identifies the port used to communicate with TSM. The IP-223 sends data through this port to TSM.
This field is automatically populated and is not editable.
TTL Field
The TTL (Time To Live) field identifies the number of routers the multicast audio packets pass through before being
discarded. The value in this field is entered by default and used by TSM to communicate with VoIP hardware.
The range for this field is 1 to 128.
Default is 6.
System Manager Setup
To Next Page
Loading...