Telex IP-223 - Editing Created Account Passwords

121
Edit Created Accounts Window
New Password Field
The New Password field is used to enter a new password for the account you are creating.
The range for this field is a 4–16 character alphanumeric password.
Confirm Password Field
The Confirm Password field is used to confirm the password you entered in the password field. This password must match
the password entered in the New password field.
To change the password for the created account, do the following:
1. In the New Password field, enter a new password.
2. In the Confirm password field, enter the same password used in step 1,
3. Click Save.
The Account Setup window opens.
4. Click Save to EEPROM.
The Save to EEPROM window opens.
5. Click Save Parameters.
Changes are now permanently saved to the IP-223 console.
Save Button
The Save button is used to save the changes to temporary memory.
To permanently save changes, do the following:
1. Click Save.
2. Click Save to EEPROM.
The Save to EEPROM window opens.
3. Click Save Parameters.
Changes are now permanently saved to the C-6200 console.