Setup Information
46
Firmware Version Field
The Firmware Version field displays the version for the currently loaded firmware.
This field is not editable.
Checksum Field
The Checksum field is calculated from the firmware programmed in the unit.
This field is not editable.
Submit Button
The Submit button is used to temporarily save changes to the IP-223.
NOTE: Click Submit to save changes in temporary memory only.
To permanently save changes, do the following:
1. Click Submit.
The changes are sent to the IP-223 in temporary storage.
2. Click Save to EEPROM.
The Save to EEPROM window opens.
3. Click Save Parameters.
Changes are now permanently saved to the IP-223 console.
To Next Page
Loading...