Telex IP-223 - iDEN Mode: LAM Setup and Monitor Relay

Setup Information
96
Per Line Setup—iDEN, View 2
LAM Level Field
The LAM Level field identifies the threshold, in dB, at which the radio/line unmutes and sends RX packets to the Ethernet.
The range for this field is -50 to +10dB.
LAM Time Field
The LAM Time field identifies the amount of time, in seconds, the console continues to play audio when receiving audio
above the LAM threshold specified in the LAM Level field. This entry is also used by the Ethernet to determine how long to
send audio.
The range for this field is 0 to 60 sec.
FIGURE 50. Per Line Setup—iDEN Mode, View 2
LAM Setup