Telex IP-223 - Completing and Saving Crosspatch Entries

Setup Information
132
24. If all of the remote crosspatch entries are complete on the window and more crosspatches need to be defined, click
Submit.
The entries currently displayed on the window are sent to the IP-223 for storage.
OR
If all of the remote crosspatch entries are complete on the window and no more crosspatches need to be defined, click
Submit.
AND
proceed to step 28.
The entries currently displayed on the window are sent to the IP-223 for storage.
25. Click Next 10 to toggle to the next Crosspatch Setup window.
26. Complete steps 13 through 22 for all desired crosspatch entries on the window.
27. After all crosspatches have been entered, click Submit.
The entries currently displayed on the window are sent to the IP-223 for storage.
28. Click Save to EEPROM.
The Save Setup Parameters window appears.
29. Click Save Parameters.
The entries are saved to permanent memory.