Tescom TC-3000C - Page 114

5.3 Reference Guide using RS-232C commands
114
CONF:RFTC:EPC:CH <Value>
Description
This command writes RX frequency of a tester(TX for a DUT).
Value
channel : RX frequency of a tester (TX for a DUT), 0 ~ 78, 0-39-78(default)
READ:RFTC:EPC:PACK_SLOT?
Description
This command reads packet slot.
CONF:RFTC:EPC:PACK_SLOT <Value>
Description
This command writes packet slot.
Value
packet slot : 1(default, DH1,2-DH1,3-DH1), 3(DH3,2-DH3,3-DH3), 5(DH5, 2-DH5, 3-DH5)
READ:RFTC:EPC:PACK_NUM?
Description
This command reads number of packets.
CONF:RFTC:EPC:PACK_NUM <Value>
Description
This command wrties number of packets.
Value
number of packet : 1(default), 0 ~ 65535
READ:RFTC:EPC:TEST_MODE?
Description
This command reads test mode.
CONF:RFTC:EPC:TEST_MODE <Value>
Description
This command writes test mode.
Value
Test mode : LOOPBACK_TEST, TRANSMITTER_TEST(default), NULL_PKT_TEST
READ:RFTC:EPC:P_MIN?
Description
This command reads the minimum power in 0.01dBm.
READ:RFTC:EPC:P_MAX?
Description
This command reads the maximum power in 0.01 dBm.
READ:RFTC:EPC:P_ST_MIN?
Description
This command reads the minimum power step in 0.01 dBm.
READ:RFTC:EPC:P_ST_MAX?
Description
This command reads the maximum power step in 0.01 dBm.