Tescom TC-3000C - Example Using Command

5.4 Example using command
147
READ:AUDIO:TEST_OP_ICFT:DF2_MIN?
Description
This command reads minimum of all maximum frequency deviations from the average frequency for the
10101010 pattern in Hz divided by 100.
5.4 Example using command
☞ EDR Relative Transmit Power(TRM/CA/10/C)
Default setting (to use default value, folling commands can be skipped)
CONF:RFTC:ETP:CH 0-39-78
CONF:RFTC:ETP:PACK_TYPE 2-LONGEST
CONF:RFTC:ETP:PACK_NUM 1
CONF:RFTC:ETP:TEST_MODE TRANSMITTER_TEST
CONF:RFTC:ETP:HOP OFF
Start Measurement
EXEC:RFTC:ETP:RUN
Read measurement result
READ:RFTC:ETP:PAV_FSK?
READ:RFTC:ETP:PAV_PSK?
READ:RFTC:ETP:PMIN_FSK?
READ:RFTC:ETP:PMIN_PSK?
READ:RFTC:ETP:PMAX_FSK?
READ:RFTC:ETP:PMAX_PSK?
To measure once again, execute again the commands as follow
EXEC:RFTC:ETP:RUN
READ:RFTC:ETP:PAV_FSK?
READ:RFTC:ETP:PAV_PSK?
READ:RFTC:ETP:PMIN_FSK?
READ:RFTC:ETP:PMIN_PSK?
READ:RFTC:ETP:PMAX_FSK?
READ:RFTC:ETP:PMAX_PSK?