Tescom TC-3000C - Initial Inspection; Power Requirement; [Table 1] Accessory List; [Table 2] Power Requirement

2.1 Initial Inspection
18
2.1 Initial Inspection
This section provides information for verifying proper shipment of the TC-3000C Bluetooth
Tester.
Product Condition and Accessory Check
1. Upon receipt of the TC-3000C Bluetooth Tester, check for damage that could
have occurred during shipment.
2. Check whether you have received all the standard accessories supplied with
TC-3000C as listed in table below.
[Table 1] Accessory List
No.
Part Number
Name
Specification
Qty.
1
3407-0004
Adaptor
N(m) to BNC(m)
1
2
4003-0012
RS-232C Cable
DB9(s) to DB9(s) cable, 2 m
1
3
4006-0004
RF Cable
N(m) to N(m) cable, 1 m
1
4
4007-0001
RF Cable
BNC(m) to BNC(m) cable, 1 m
2
5
4008-0012
LAN Cable
STP, Cross, RJ45 cable, 2 m
1
6
4008-0016
USB Cable
USB A (p) to USB A (s) cable, 1.8 m
1
7
E92050A
Antenna
Sleeve 2.4 GHz
1
8
E99912A
Attenuator
10 dB, 0.5W, N Type
1
9
Power Cord
2 m
1
10
Operating Manual
1
2.2 Power Requirement
This Tester is a portable instrument, requiring no physical installation other than connection
to a power source.
[Table 2] Power Requirement
Characteristic
Requirement
Input voltage
100 VAC - 240 VAC
Frequency
50/60 Hz
Power Consumption
Less than 40 watt
WARNING
To avoid hazardous electrical shock, do not perform electrical tests when there are
signs of shipping damage to the equipment.