5.3 Reference Guide using RS-232C commands
127
CONF:RFTC:OPMOD:PACK_NUM <Value>
Description
This command writes number of packets.
Value
number of packet : 0 ~ 65535, 2(default)
READ:RFTC:OPMOD:HOP?
Description
This command reads hopping mode.
CONF:RFTC:OPMOD:HOP <Value>
Description
This command writes hopping mode.
Value
hopping mode : ON, OFF(default)
READ:RFTC:OPMOD:TEST_MODE?
Description
This command sets test mode.
CONF:RFTC:OPMOD:TEST_MODE <Value>
Description
This command writes test mode.
Value
Test mode : LOOPBACK_TEST, TRANSMITTER_TEST(default), NULL_PKT_TEST
READ:RFTC:OPMOD:P_AVG?
Description
This command reads the average power.
READ:RFTC:OPMOD:P_MAX?
Description
This command reads the maximum power.
READ:RFTC:OPMOD:P_MIN?
Description
This command reads the minimum power.
READ:RFTC:OPMOD:DF1_AVG?
Description
This command reads average of all maximum frequency deviations from the average frequency for the
11110000 pattern in HZ divided by 100.
READ:RFTC:OPMOD:DF2_AVG?
Description
This command reads average of all maximum frequency deviations from the average frequency for the
10101010 pattern in Hz divided by 100.
READ:RFTC:OPMOD:DF2_MIN?
Description
To Next Page
Loading...
