Tescom TC-3000C - Page 177

5.7 Reference Guide for using DLL
177
This function writes the flag, which defines whether role(either master or slave) should behave the tester
during initialization the AudioGateway profile.
Syntax
unsigned long write_dut_profile_role(char prof_role);
Return Value
The return value of this function will be zero if the function is successful. Otherwise, the return value will be
an error code.
Parameter
prof_role // 0:master, 1:slave.
read_dut_s_m_gain_ctrl
Description
This function reads the flag, which defines whether gain control of the speaker or mikrophone of the DUT
(Headset or Handsfree) should be controlled from a tester.
Syntax
unsigned long read_dut_s_m_gain_ctrl(char *gain_ctrl);
Return Value
The return value of this function will be zero if the function is successful. Otherwise, the return value will be
an error code.
Parameter
gain_ctrl // 0:Disable, 1:Enable.
write_dut_s_m_gain_ctrl
Description
This function writes the flag, which defines whether gain control of the speaker or mikrophone of the DUT
(Headset or Handsfree) should be controlled from a tester.
Syntax
unsigned long write_dut_s_m_gain_ctrl(char gain_ctrl);
Return Value
The return value of this function will be zero if the function is successful. Otherwise, the return value will be
an error code.
Parameter
gain_ctrl // 0:Disable(default), 1:Enable.
read_dut_speaker_volume_gain
Description
This function reads default value of the speaker volume gain of the DUT.
Syntax
unsigned long read_dut_speaker_volume_gain(char * vgs);
Return Value
The return value of this function will be zero if the function is successful. Otherwise, the return value will be
an error code.
Parameter
vgs // speaker volume gain of a headset or a handsfree. Range 0...15
write_dut_speaker_volume_gain
Description