3.8 Operation Procedure (Bluetooth Conformance Test)
70
EDR BER Floor Performance
Combined Test Case for “Quick Test”
To reduce test time, TC-3000C combine several test cases into one menu. In this Test Case,
all default values of parameters are optimized in consideration of the test time. You can
perform four Test Cases (Output Power, Modulation Characteristics, Initial Carrier Frequency
Tolerance, and Carrier Frequency Drift) at once.
“Basic Operation Procedure” on page 3-12 should be performed before following
steps.
Combined Test Case: Output
Power, Modulation Characteristics,
Initial Carrier Frequency Tolerance,
and Carrier Frequency Drift are
combined in this menu.
To Next Page
Loading...
