THOMSON Amethyst III User Manual

Chapter 3 ’Web Browser Interface’ — Interface Description
Amethyst III DTV Smart Switch 145
User Manual
PID 0x12 EIT (3.6.a.1) This test checks the Table Identifier (TID) of the sections
that are found on PID 0x12. The only TIDs that should be
found are in the range 0x4E-0x6F (EIT) or 0x72 (ST).
There are no specific parameters to set.
This test checks the first part of the test 3.6.a
EIT_actual_error of TR 101 290.
   M   
EIT Actual P/F Interval
(3.6.a.2)
This test checks EIT actual P/F periodicity, i.e. the
intervals of EIT actual present and following.
The analysis of the SDT actual indicates which EIT actual
P/F shall be checked: for a given program, the EIT actual
P/F shall be present if the
EIT_present_following_flag is
set.
An alarm is raised if the interval between two
occurrences of the EIT actual present section is greater
than the value set in the Maximum period without EIT
Actual P/F field, in milliseconds.
This test checks the second part of the test 3.6.a EIT
actual_error of TR 101 290.
   O   
EIT Other P/F Interval
(3.6.b)
This test checks EIT other P/F periodicity, i.e. the
intervals of EIT other present and following.
The analysis of every SDT other of the TS indicates
which EIT other P/F shall be checked: for a given
program, the EIT other P/F shall be present if the
EIT_present_following_flag is set.
An alarm is raised if the interval between two
occurrences of the EIT other present section is greater
than the value set in the Maximum period without EIT
other P/F field, in milliseconds.
   O   
EIT P/F Error (3.6.c) This test checks that if either section (0 or 1) of each EIT
P/F subtable is present, both exist. More precisely, it
checks that
last_section_number of each EIT P/F section
is 1.
There are no specific parameters to set.
To really check that both sections are broadcast, you
should activate tests that check their periodicity:
 EIT actual P/F interval (3.6.a.2),
 EIT other P/F interval (3.6.b).
   — — — —
Table 3-11. TR 101 290 Level 3 (DVB)
Format Persistence
Test Description
ASI 310M GigE Optional/Mandatory Duration Upper threshold Lower threshold

THOMSON Amethyst III Specifications

General

Brand	THOMSON
Model	Amethyst III
Category	Switch
Language	English