THOMSON Amethyst III - Page 153

Chapter 3 ’Web Browser Interface’ — Interface Description
Amethyst III DTV Smart Switch 153
User Manual
CRC This test checks CRC on sections of the PIDs you
configured.
For each PID you wish to check, click the Add P
ID button
and specify the PID value in the displayed field.
   M   
Check Subtable PID This test checks the presence of unexpected subtables
on specific PIDs.
You can declare private subtables or MPEG2/DVB tables.
NOTE: A DVB subtable can be declared as a private
subtable.
1. Enter the value of the Table PID in the field.
2. Enable the Check TID option if you wish to check
that no other TID than the one(s) you defined are
present on the configured PID.
3. To define TIDs,
a. Right-click the Check sub-table PID item from
the tree on the left,
b. Choose Add | TID
c. Set the TID as follows:
- TID: enter the value of the TID
- Table type: choose from the drop-down list
the number of TidExt of the table.
- Check TidExt1 level: check the box if you
wish to check the presence of unexpected
subtables at the TidExt1 level.
At each level, you can choose to check the inferior level,
by enabling the Check TidExt[n] level op
tion.
For each level, enter the Ti
dExt value.
   M   
Table 3-14. Template checking tests
Format Persistence
Test Description
ASI 310M GigE Optional/Mandatory Duration Upper threshold Lower threshold