Chapter 3 ’Web Browser Interface’ — Basic Settings
78 Amethyst III DTV Smart Switch
User Manual
IP switch
Figure 3-16. Editing the IP switch parameters
1.
Enter a proper name in the Name field. For example, you can name
the ASI switch after the TS number.
2.
Select the strategy to apply from the Strategy drop-down list. Three
strategy options are available: Redundancy, Main-spare, Manual.
3.
In the Switch delay area, enter the delays before switching in the
respective fields for minor alarm, for major alarm and for critical
alarm. This setting is required to avoid unwanted switching when
transitory events occur.
For more information on item parameters, refer to the
Section ’Switch
Item (ASI or IP)’
on page 126 and
Section ’Switch Item (ASI or IP)’
on
page 126.
To Next Page
Loading...
Need help?
General
