Topcon OPUS A6G2 - Page 486

486
OPUS Projektor Manual
Object Reference
Name
Type
Events / Actions
Description
Command: stop
Value: Value Not Set
media time string field (14) will be
set to “00:00 / <totalTime>” and the
position bargraph's (7) current
value will be set to 0. The play
button will automatically be set to
the released state. If the stop
command is executed while no
playback is in progress, it will have
no effect.
3
Previous
Button
OnRelease
Set Media Player
Command
Command: previous
Value: Value Not Set
When the "previous" command is
executed, the media file before the
current file in the playlist (17) will
be selected. If the current file is the
first file in the playlist, pressing the
previous button will have no effect.
4
Next
Button
OnRelease
Set Media Player
Command
Command: next
Value: Value Not Set
When the "next" command is
executed, the media file after the
current file in the playlist (17) will
be selected. If the current file is the
last file in the playlist, pressing the
next button will have no effect.
5
Position
Decrease
Button
OnRelease
Set Media Player
Command
Command: set
position
Value: -10
By executing the "set position"
command without a value, the
current value of the position
bargraph (7) is used to set the
playback position of the current
file. If a value is provided, this value
is used as an offset to set the
current position as long as it is not
longer than the total length of the
current media file.
6
Position
Increase
Button
OnRelease
Set Media Player
Command
Command: set
position
Value: +10
7
Position Bar
Linear
Bargrap
h
OnValueChange
Set Media Player
Command
Command: set
position
Value: Value Not Set
8
Shuffle
Button
OnPress
Set Media Player
Command
Command: shuffle
Value: Value Not Set
OnRelease
Set Media Player
Command
If the "shuffle" command is
executed, the playlist order will be
randomized. If the media player is
in play state, the current selected
file shall be still continued.
The button includes two picture
graphics for showing shuffle or not