716
OPUS Projektor Manual
Miscellaneous
The LED / Backlights screen allows changing the values for display, key, encoder backlight
and the multicolor LED.
The - (minus) and + (plus) buttons change the according value. The amount that the current
value is modified by, can be chosen with the Modifer dropdown.
Store display brightness as startup value changes the startup display brightness (i.e. the
screen brightness when the device is powered on until the application setting sets in).
LED Auto Mode on starts gradual color changes for the multi color led.
Disp Back Auto opens the automatic backlight setup screen.
Key / Enc Colors opens the screen for key and encoder backlight colors.
Back returns to the main menu.
Service Project -> LED / Backlights -> Display Backlight Auto Mode
To Next Page
Loading...