81
OPUS Projektor Manual
User Interface
By Pressing on "Deselect image" , the image will be removed.
The selected image will be directly displayed after the cold start of the display after the
project is installed.
By pressing on "Deselect logo", the image will be removed.
Note that the deselected boot logo will not be removed from the device upon the next
installation of the project.
The selected image will be displayed while the PClient starts and while the PClient shuts
down.
By pressing on "Deselect image", the image will be removed.
Note that the deselected image will not be removed from the device upon the next
installation of the
Recovery / Service Boot Logo
The selected image will be directly displayed after the cold start of the display in service
mode after the project is installed.
By pressing on "Deselect logo", the image will be removed.
Note that the deselected boot logo will not be removed from the device upon the next
installation of the project.
The project icon will be used on the applications running on the target device e.g. sunrise
or
for PClient- and variables simulation applications running on windows operating system.
By pressing on "Deselect icon", the selected image will be removed.
Language Properties
To Next Page
Loading...