e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 52
[E200] 1st drawer transport jam (not reaching the registration sensor)
[E210] 2nd drawer transport jam (not reaching the registration sensor)
[E270] Bypass transport jam (not reaching the registration sensor)
[E300] 3rd drawer transport jam (not reaching the registration sensor)
[E330] 4th drawer transport jam (not reaching the registration sensor)
[E3C0] LCF transport jam (not reaching the registration sensor)
Classification Error item
Paper transport jam The paper does not reach the registration sensor after it has
passed the 1st drawer feed sensor.(E200)
The paper does not reach the registration sensor after it has
passed the 1st drawer feed sensor.(E210)
Paper fed from the bypass tray and passed through the
bypass feed sensor does not reach the registration
sensor.(E270)
Check item Measures
Registration sensor • Sensor check
(Perform the input check: 03-[ALL]OFF/[4]/[B],03-
[COPY]ON/[5]/[F])
• Connector check
• Harness check
Transport motor-1 • Motor check
(Perform the output check: 03-124/524)
• Connector check
• Harness check
PFC board • Connector check (CN500, CN512, CN520)
• Board check
LGC board • Connector check (CN309)
• Board check
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Registration sensor
Transport motor-1
PFC board
LGC board
Rollers
To Next Page
Loading...
