8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 69
[E071] 1st drawer media type mis-setting jam
[E072] 2nd drawer media type mis-setting jam
[E073] 3rd drawer media type mis-setting jam
[E074] 4th drawer media type mis-setting jam
[E075] Option LCF media type mis-setting jam
[E076] Tandem LCF media type mis-setting jam
[E090] Image data delay jam
Classification Error item
Paper transport jam The media type setting of the 1st drawer is incorrect. (E071)
The media type setting of the 2nd drawer is incorrect.(E072)
The media type setting of the 3rd drawer is incorrect.(E073)
The media type setting of the 4th drawer is incorrect.(E074)
The media type setting of the option LCF is incorrect.(E075)
The media type setting of the tandem LCF is incorrect.(E076)
Check item Measures
Outline Remove any paper which has jammed due to media type mis-
setting and then confirm and set the following
Setting When this jam occurred during fax data printing, the user
must place paper of the same media type as that of the set
paper. If the user does not have this media type, the media
type setting must be changed by means of the following
codes.
08-9300: 1st drawer media type setting (*1)
08-9301: 2nd drawer media type setting (*1)
08-9302: 3rd drawer media type setting (*1)
08-9303: 4th drawer media type setting (*1)
08-9304: Tandem LCF media type setting (*1)
08-9347: Option LCF media type setting (*1)
(*1) 0: Plain paper, 1: Thick paper 1, 2: Thick paper 2, 3: Thick
paper 3, 8: Recycled paper, 9: Plain paper 1, 10: Plain paper
2
Cases media type setting change (08
code) is required
When a drawer is set for fax data printing but the user does
not have the media type set for the fax drawer
When no drawer is set for fax data printing but the user does
not have any media type set for each drawer
If the media type is correctly set but this error occurs
frequently, this media type may be the one which cannot be
distinguished easily. In this case change the code below to
disable the media type setting checking function.
08-4598 0: Enabled 1: Disabled
Classification Error item
Other paper jam Image data to be printed cannot be prepared.
Check item Measures
Other • Remove the paper remained in front of the registration
sensor.
• If the error still occurs, check the following.
Power • Check if the error is cleared by turning the power OFF and
then back ON.
To Next Page
Loading...
