e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 90
[EA23] Paper transport jam in Finisher (transport sensor)
[EA24] Paper transport jam in Finisher (entrance sensor - transport sensor)
Finisher controller board • Connector check
• Board check
Replace parts Remarks
Paper position sensor (S6-1)
Paper position sensor (S6-2)
Finisher controller board
Classification Error item
Finisher jam
(Finisher section)
[MJ-1103/1104]
Check item Measures
Finisher • Check if there is any paper in the finisher or on the
transport path of the equipment and remove it if there is.
Transport sensor (S2) • Sensor check
• Connector check
• Harness check
Finisher controller board • Connector check
• Board check
Replace parts Remarks
Transport sensor (S2)
Finisher controller board
Classification Error item
Finisher jam
(Finisher section)
[MJ-1103/1104]
Check item Measures
Finisher • Check if there is any paper in the finisher or on the
transport path of the equipment and remove it if there is.
Entrance sensor (S1) • Sensor check
• Connector check
• Harness check
Transport sensor (S2) • Sensor check
• Connector check
• Harness check
Entrance motor (M1) • Motor check
• Connector check
• Harness check
Finisher controller board • Connector check(CN6, CN26)
• Board check
Check item Measures
To Next Page
Loading...
