3 SETTING OF BASIC COPY MODES
118 Selecting Finishing Modes
3
Press the finisher button on the basic menu.
4
Press the [FRONT STAPLE SORT] (or [DOUBLE STAPLE SORT] or
[REAR STAPLE SORT]) button.
Set other copy modes as required.
5
Press the [START] button.
If the paper quantity exceeds the maximum number of sheets that can be stapled, the
Finisher automatically enters the sort mode.
Maximum number of sheets for stapling
y For the tray loading capacity, see P.377 “Specifications of Options”
y Two covers of 17 lb. Bond to 140 lb. Index can be added. In this case, the covers are
included in the maximum number of sheets that can be stapled.
Saddle Stitch Finisher (MJ-1030)/Finisher (MJ-1101)
*1 MJ-1030: 26 sheets
*2 MJ-1030: 24 sheets
LT Plain paper, Recycled paper 17-20lb.Bond 50 sheets
Plain paper 21-24lb.Bond
30 sheets
*1
25-28lb.Bond
30 sheets
*2
LD, LG, LT-R, COMP Plain paper, Recycled paper 17-20lb.Bond 30 sheets
Plain paper 21-28lb.Bond 15 sheets
To Next Page
Loading...
Need help?
General
