Toshiba e-STUDIO3510c - Misfeed in the Finisher and the Hole Punch Unit (Optional: MJ-1101, MJ-6101)

9 BLINKING GRAPHIC SYMBOLS
316 Jam Symbols
Misfeed in the Finisher and the Hole Punch Unit (optional: MJ-1101,
MJ-6101)
A paper misfeed at the upper tray
1
Raise the lever, and then open
the upper tray.
2
Remove any misfed paper.
3
Holding the cover handle of
the Bridge Unit, open the
cover.
When the Hole Punch Unit (optional: MJ-
6101) is installed, proceed to step 5.