3 SETTING OF BASIC COPY MODES
124 Selecting Finishing Modes
Manual stapling (MJ-1101 only)
The manual stapling function which enables you to use the staple function without making cop-
ies is available in the Finisher (MJ-1101, optional). This function is useful when copies are made
without stapling being set or when you want to staple originals.
A: Stapling position lamps C: Manual-stapling lamp
B: [Stapling position] button D: [Manual-stapling] button
1
Press the [Manual-stapling] button.
The shutter in the paper exit area is opened.
2
Press the [Stapling position] button to switch the stapling position.
Stapling positions are the front and the other end.
The stapling position lamp corresponding to the selected stapling position lights in green.
3
Place paper in the lower tray of the finisher.
Jog the paper well and place it with its face down.
Place the paper in front to have it stapled in the front, and in the other end to have it
stapled in the other end.
Check that the manual-stapling lamp lights in green. If not, place the paper again.
A C DB
To Next Page
Loading...
Need help?
General
