Setting Originals 67
Book-type originals
Do not place heavy objects (9 lb. or more) on the original glass and do not press on it with force.
Breaking the glass could injure you.
1
Raise the original cover or Reversing Automatic Document Feeder
(optional).
3
Lower the original cover or Reversing Automatic Document Feeder
(optional) carefully.
y Do not lower the Reversing Automatic Document Feeder forcibly when the original is
very thick. There will be no problem in copying even if the Reversing Automatic Doc-
ument Feeder is not fully lowered.
y Do not look fully at the original glass because intensive light may leak out during
copying.
2
Open the desired page of the
original and place it face down.
Align it against the left rear
corner of the glass.
y When you want to use the 2-sided
copying function or the dual-page
function on the book-type originals,
align the center of the original on the
yellow indicator line of the glass.
( P.131 “Book-type original -> 2-
sided copy”)
( P.167 “DUAL PAGE”)
To Next Page
Loading...
