11 MAINTENANCE
368 Daily Inspection
Daily Inspection
We recommend you to clean the following items weekly, so that the originals can be scanned in
unsoiled conditions.
Be careful not to scratch the parts that you are cleaning.
1. Scanning area
Clean the surface with a dry soft cloth or a cloth lightly moistened with water.
Do not use solvents such as alcohol.
2. Original glass
3. Guide
4. Platen sheet
Clean the surface as follows depending on the staining.
y Clean it with a soft cloth.
y Clean it with a soft cloth lightly moistened with water.
y Clean it with a soft cloth lightly moistened with alcohol, and then wipe it with a dry cloth.
y Clean it with a soft cloth lightly moistened with watered-down neutral detergent, and then
wipe it with a dry cloth.
y Do not use solvents such as thinner or benzine when cleaning the surface of the equipment.
This could warp the shape of the surface or leave it discolored.
y When using a chemical cleaning pad to clean it, follow the instructions.
1
2
3
4
To Next Page
Loading...
Need help?
General
