Selecting Finishing Modes 117
4
Press the [ROTATE SORT] button.
Set other copy modes as required.
5
Press the [START] button.
Staple sort mode
When the Finisher (optional) is installed, automatic stapling is enabled. You can select the sta-
pling position from three types.
y Special paper such as OHP films or sticker label cannot be used for stapling.
y Copies in different size cannot be stapled. (When the lengths of the copies are the same,
they can be stapled even if their sizes are different.)
(Example of selecting the [FRONT STAPLE SORT] button)
1
Place paper in the drawer(s).
When using this mode in bypass copying, specify the paper size in advance. ( P.81
“Bypass Copying”)
2
Place the original(s).
To Next Page
Loading...
