Replace Toner Bag Symbol 303
Replace Toner Bag Symbol
When the toner bag becomes full of used toner, the replace toner bag symbol blinks and “Dis-
pose of used toner” appears.
Replace the toner bag following the procedure below.
1
Open the front cover.
2
Pull the toner bag out care-
fully.
Do not tilt the toner cartridge, or the
toner may be spilled out.
Never attempt to incinerate toner bags.
Dispose of used toner cartridges and
toner bags in accordance with local reg-
ulations.
3
Remove lids from the side of
the toner bag.
To Next Page
Loading...
Need help?
General
