1 BEFORE USING EQUIPMENT
44 Preparation 1- Turning Power On/Off
User management
Users of the equipment can be limited and the available functions and past record of each user
can be controlled by using the user management function. When the equipment is managed
under this function, turn the power of the equipment ON and enter the information required (e.g.
user name, password) to use the equipment. The menu for entering user information also
appears when you pressed the [ACCESS] button on the control panel or automatic function
clear has worked. Enter the information following the procedure below.
1
The menu for user authentication appears.
MFP local authentication, LDAP authentication
Windows Domain Authentication
The domain name previously set by the network administrator is displayed in [DOMAIN].
If the domain name belonging to your organization is not displayed, press the [DOMAIN]
button and select it.
To Next Page
Loading...
Need help?
General
