Toshiba e-STUDIO3510c - 2-Sided Original -> 2-Sided Copy

Duplex Copying 129
2-sided original -> 2-sided copy
1
Place paper in the drawer(s).
When using this mode in bypass copying, specify the paper size in advance. ( P.81
“Bypass Copying”)
2
Place the original(s).
3
Press the simplex/duplex button on the basic menu.
4
Press the [2 -> 2 DUPLEX] button.
Set other copy modes as required.
5
Press the [START] button.
When placing an original on the original glass, follow steps 5 to 6 of  P.74 “Placing an
original on the original glass” continuously.