Printing Stored Documents 221
Printing Stored Documents
Stored documents can be printed out. You can also print out a part of a document and change
the setting in the finishing mode or the like before printing the documents.
Printing the whole document
All pages of the document are printed. If printing multiple copies is desired, see P.224 “Print-
ing the stored document after changing the settings”.
2
Select the box in which the desired printing document is stored,
and then press the [ENTER] button.
y If the desired box is not displayed on the menu, press the [Prev] or [Next] button to
switch the menu.
y To display the applicable menu immediately, key in the box number.
3
Key in the password (5 digits) for the selected box, and then press
the [ENTER] button.
If no password was set when the box was registered, skip to step 4.
1
Press the [e-FILING] button on
the control panel.
To Next Page
Loading...
Need help?
General
