Toshiba e-STUDIO3510c - Creating a bookbinding margin

IMAGE SHIFT 159
Creating a top or bottom margin
1
Place paper in the drawer(s).
When using this mode in bypass copying ( P.81), be sure to specify the paper size.
2
Place the original(s).
3
Press the [EDIT] button to enter the edit menu, and then press the
[IMAGE SHIFT] button.
4
Press the [TOP] (or [BOTTOM]) button.
5
Adjust the margin width by pressing the [2 mm] or [100 mm] button,
and then press the [ENTER] button.
y The default width of the margin is 7 mm (0.276").