Toshiba e-STUDIO3510c User Manual

Preparation 2- Setting Copy Paper 53
Setting copy paper (size change)
When you set or add copy paper in the drawer, follow the procedure below.
Placing paper in the drawer
1
Turn the power on.
2
Pull out the drawer carefully
until it comes to a stop.
3
Push the lower part of the end
guide in the direction of the
arrow to remove it, then rein-
stall it at the desired paper size
(indicated on the bottom inner
surface on the drawer).
4
Push the arrow part (right side)
of the side guide to unlock it.

Toshiba e-STUDIO3510c Specifications

General

Brand	Toshiba
Model	e-STUDIO3510c
Category	All in One Printer
Language	English