Preparation 1- Turning Power On/Off 43
When department or user management is used
When the use of the equipment is managed under department management or user manage-
ment function, each user needs to enter the department code or user information.
Department management
You can restrict users or manage copy volumes made by an individual group or department in
your company using the department codes. When the copy volume is controlled under the
department code, enter the code after turning the power on. See the User Functions Guide for
setting and registration of the department codes.
When the power is turned on, the following menu appears.
This menu also appears when the [ACCESS] button is pressed or the automatic function clear
has worked.
Key in a department code (5 digits) previously registered and press the [ENTER] button. The
menu will switch and the equipment will be ready to be used.
If the department code keyed in is incorrect, the menu does not change. Key in the correct
department code.
When copying is finished
When you finish all operations, press the [ACCESS] button to prevent unauthorized use of the
equipment. The display returns to the department code input menu.
To Next Page
Loading...
Need help?
General
