“Examine stapler in the Saddle Stitch Unit” 347
“Examine stapler in the Saddle Stitch Unit”
This message appears when the staples in the Saddle Stitch Unit of the Saddle Stitch Finisher
(optional) are jammed. To remove them, follow the procedure below.
1
Open the front cover of the fin-
isher.
2
Slide the Saddle Stitch Unit
carefully toward the front.
3
Pull the handle of the stapler of
the Saddle Stitch Unit toward
you to unlock it. Then turn the
stapler clockwise for about 60
degrees.
The stapler will be locked and will not be
turned any further when it becomes
almost horizontal.
2
1
To Next Page
Loading...
