5 USING THE EDITING FUNCTIONS
194 IMAGE DIRECTION
IMAGE DIRECTION
This function allows you to adjust the direction to ‘open toward the left’ when a portrait original
such as LD, LT, LG, ST-R, etc., which is placed in a landscape direction, is copied under the
mode of “1-Sided Originals to 2-Sided Copies”.
This function is not necessary for copying in the direction of ‘open to top’.
When a 2-sided ‘open toward the left’ (Book) portrait LD, LT, LG, ST-R original, etc. is copied
using this function with [2-Sided Originals to 1-Sided Copies], copies can be adjusted to the
same direction.
[IMAGE DIRECTION]:
1. Set
2. No setting
1
Place paper in the drawer(s).
2
Place the original(s).
3
Perform the setting of [1 -> 2 DUPLEX] (or [2 -> 1 SPLIT]).
P.126 “Duplex Copying”
4
Press the [EDIT] button to enter the edit menu. Then press the
[Next] button to switch the menu, and press the [IMAGE DIREC-
TION] button.
y The direction of the copy is adjusted by this operation.
1
2
To Next Page
Loading...
Need help?
General
