Selecting Finishing Modes 125
4
Release the paper and press the [Manual-stapling] button.
The stapling position lamp blinks when the stapling is completed. Remove the paper.
Be sure to release the paper before the manual stapling.
y Operation can be continued while the manual-stapling lamp lights. If no operation is
performed for approx. 15 min., the manual stapling operation is stopped.
y If you want to stop the manual stapling operation during setting, remove paper and
press the [Manual-stapling] button. The shutter in the paper exit area is closed and
the operation of the manual stapling is finished.
Specification
Acceptable paper size LD, LG, LT, LT-R, COMP, 13” LG, 8.5” SQ, 8K, 16K, A3, A4, A4-R, B4
Maximum number of
sheets for stapling
50 sheets (LT, 8.5” SQ, 16K, A4: 17 - 20 lb. Bond)
30 sheets (LD, LG, LT-R, COMP, 13” LG, 8K, A3, A4-R, B4, FOLIO: 17 - 20
lb. Bond)
30 sheets (LT, 8.5” SQ, 16K, A4: 21 - 28 lb. Bond)
15 sheets (LD, LG, LT-R, COMP, 13” LG, 8K, A3, A4-R, B4, FOLIO: 21 - 28
lb. Bond)
Stapling position Front, Rear
To Next Page
Loading...
