5 USING THE EDITING FUNCTIONS
204 IMAGE REPEAT
6
Change the number of repeat using the [< 2] and [8 >] button, and
then press the [ENTER] button.
y Copying is repeated in the vertical direction.
y If the repeated image runs off the specified paper size, the part run off will not be cop-
ied.
8
Press the [START] button.
7
Turn over the original.
y Set the original with its face down
and bottom toward you and fit its top
left corner against that of the original
glass.
y Select other copy modes as
required.
To Next Page
Loading...
