Description of Each Component 31
5. Charger cleaner
P.332 ““Time for Slit glass and Main charger cleaning””
6. Toner bag
P.303 “Replace Toner Bag Symbol”
7. Slit glass cleaner
Use this if the copied or printed paper is stained.
P.332 ““Time for Slit glass and Main charger cleaning””
8. Paper exit stopper
Use this to prevent the exiting paper from falling. Open this when you make a large amount
of copies on a larger size of paper (e.g. LD, LG).
9. Receiving tray
Printed paper exits into this tray. The loading capacity is approx. 550 sheets (28 lb. Bond).
(This may vary depending on the degree of paper curling.)
10. Scanning area
The data of originals transported from the Reversing Automatic Document Feeder (optional,
MR-3018) are scanned here.
P.368 “Daily Inspection”
11. Original scale
Use this to check the size of an original placed on the original glass.
12. Touch panel contrast adjustment dial
Use this when it is difficult to see the display on the touch panel.
13. Black toner cartridge
14. Cyan toner cartridge
15. Magenta toner cartridge
16. Yellow toner cartridge
P.296 “Replace Toner Cartridge Symbol”
To Next Page
Loading...
Need help?
General
