EVM Series
Applications
EVM Series User Manual
EVM Series
Applications
A real-time, direct reading dust monitor is used in many different applications such as walk-through
surveys in manufacturing, wood making plants and/or bakery shops, background sampling, site dust
measurements, assessment of the effectiveness of dust control systems, and measurement of indoor air
quality (IAQ). It is also used to analyze work-place exposure and help identify dust control techniques
such as training or implementing engineering controls.
Industrial setting - Used to monitor and ensure health
and safety in settings where toxic fumes are released
(such as testing levels at a paper mill or a foundry). This
information can be used to identify the source and
particle concentrations.
Sick Building syndrome – Used to evaluate air toxins
and ensure building standards maintain a comfortable
work setting.
Outdoor monitoring applications include construction
sites/dust outside of mines.
Regulatory compliance (i.e., OSHA, MSHA, IEC,
ACGIH).
As a mapping device- Layout a grid of high contaminant
areas, and quickly collect sample data at multiple
locations to help identify paths and sources, by relative
readings.
As a survey monitor
Specific area in a plant/facility – used to maintain a
quality work environment and conduct area
monitoring samples throughout an entire facility.
Specific areas in a plant/facility- used to identify
key areas that may be toxic or unsafe and implement
acceptable practices such as changes in the
ventilation.
Time history: manufacturing
To Next Page
Loading...
