TSI Quest EVM-7 - Gas Measurements; Gas Screen

Gas Measurements
Gas Screen
EVM Series User Manual
79
 To change the RH and Temperature measurement view
1. Press the Select soft key, Trend soft key, or the Detail soft key. (See Table 5-1 for details).
 NOTE: The ▲/▼ Arrows can be used instead of the Select soft key.
Gas Measurements
The gas measurement screen displays the measurements for CO
2
, toxic gas(es), and PID sensor.
 NOTE: Depending on what sensors you ordered and which sensors are installed, the appropriate
gas sensors will display on this screen.
Gas Screen
Figure 5-9: Gas measurement screen
 To change the gas measurements view
1. Press the Select soft key, Trend soft key, or the Detail soft key. (See “Viewing summary/details”
or “Viewing trend details.)
 NOTE: The ▲/▼ Arrows can be used instead of the Select soft key.