File System Menu
Estimated Run Time
EVM Series User Manual
Estimated Run Time
The Estimated Run Time screen displays the amount of days, hours, and minutes’ remaining on the
instrument. You can extend the run time if you log less parameters (such as, only logging MAX or
increasing the log interval.)
You may want to download and save your files in DMS and then clear the memory on the EVM. This will
also extend the logged time. For more information on estimated run time charts, see Appendix A,
“Estimated logged run times.”
NOTE: The estimated run time screen is also viewable via the logging setup screen (for more
details, see Chapter 3, “setting logging and viewing runtime”).
View estimated run time
1. Open the File System screen from the Start menu and select the Estimated Run Time menu by
repeatedly pressing the Down arrow key.
2. Then, press Enter
key and the Estimated Run Time screen will appear.
Figure 5-21: Viewing estimated run time
To Next Page
Loading...
Need help?
General
