Setting up Parameters via the Keypad
Checking Battery Power
EVM Series User Manual
6. Continue to repeat steps 3-5 until all changes have been made.
Time
Date
Day – auto fills based on what you entered in the
Date field
Figure 3-1: Time-Date screen parameters
7. Press the On/Off/Esc
twice to return to the start screen.
Remember, once you return to the start screen, you can press the right or left arrows to toggle
through the measurement screens.
Checking Battery Power
The battery power is supplied by an internal lithium-ion rechargeable battery pack with a minimum of
8 hours of continuous operation.
NOTE: The battery pack is not-user replaceable and would need to be changed at TSI or your
authorized dealer.
The battery screen is used to determine the battery capacity status. When operating from the battery,
you can check the remaining capacity of the battery pack at any time by accessing the Battery screen.
Additionally, a battery indicator will be present on all screens to notify you of the remaining battery
capacity. If the battery indicator is at 100%, it will look similar to the Figure 3-3 below.
If you are charging the battery, the battery screen will display “battery is charging” with an updating
indicator bar. The battery power percentage will update accordingly.
To Next Page
Loading...
Need help?
General
