Getting Started
Checking the Equipment
EVM Series User Manual
Getting Started
This chapter is designed to guide you through basic information you will need to begin measuring with
your environment monitor.
Checking the Equipment
If your instrument was sent to you in a storage case, remove all the packaging and acquaint yourself
with the following equipment.
NOTE: Depending on the accessories you selected, the EVM may have the components displayed in
Figure 2-1. For additional sensors or other accessories, refer to “Replacement parts.”
Environmental Monitor
(EVM)
USB cable- connects to the
external output of the EVM
to your PC
**Universal Power adapter
(External Power supply for
EVM)
Sample senor (Your
sensors will be calibrated
and placed inside the
instrument, depending on
what you ordered. The
sensor type is labeled on
the side of the cylinder.)
Example of a cal gas and
regulator
HEPA filter/Zero filter for
particulate calibrations
PID cleaning kit (for
measuring VOCs) (Cotton
swabs, cleaning solution, &
electrode pellets
Silicone grease (for
greasing impactors )
Figure 2-1: Identifying your equipment
To Next Page
Loading...
Need help?
General
