Product description
Functions and operation modes
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 15
The following read/write heads can be used for HF bus mode:
n TN-M18-H1147/C53
n TB-M18-H1147/C53
n TN-M30-H1147/C53
n TB-M30-H1147/C53
n TN-CK40-H1147/C53
n TB-Q08-0.15-RS4.47T/C53
n TN-Q14-0.15-RS4.47T/C53
n TN-Q80-H1147/C53
n TN-R42TC-EX/C53
n TN-R42TC-EX/C65
n TNLR-Q80-H1147/C53
n TNSLR-Q42TWD-H1147/C53
n TNSLR-Q80WD-H1147/C53
HF bus mode supports the HF read/write heads from firmware version Vx.90.
Continuous bus mode supports HF read/write heads from firmware version Vx.93.
Firmware version V3.6.1.0 or higher is also required for Continuous bus mode on the TBEN-S
module.
UHF compact mode
UHF compact mode enables up to 128 bytes of data to be transferred in single applications
(e.g. EPC).
UHF extended mode
All functions of the UHF compact mode are included in UHF extended mode. It is also possible
to transfer more than 128 bytes of data. The operation mode is suitable for single-tag and mul-
titag applications. The user can set a command timeout to define the time for the execution of
a command.
UHF extended mode enables the use of Presence sensing mode for the repeated execution of
an Inventory, read or write command. In Presence sensing mode the UHF readers are automat-
ically switched on or off and also carry out the commands automatically. In this case, the read
data is stored in the internal memory of the interface. The memory operates as a FIFO memory.
To Next Page
Loading...
Need help?
General
